260mm Track Saw Square Right Angle Circular Saw Guide Rail Angle Stop Compatible with Festool and Makita Guide Rail

Product Information

If you’ve already done that, your item hasn’t arrived, or it’s not as described, you can report that to Etsy by opening a case. Quote from: Joebuck on November 25, 2020, 10:12 AM I had the same problem when I first used my TSO GRS-16.

Thanks to this guide rail square all you have to do to is to position the rail with the square attached at the edge of the material. You can also install the guide rail square on the far side of the guide rail on the opposite side of the work piece. But if, like me, you only have a few, 5 ~ 50 then probably never the same again the Festool FS-PV is a far better tool.My point is that you can want a cheap tracksaw and still want a rail square, because you might still need to make square cuts. Getting the actual cut to be square is entirely different story as many have noticed and there are many things to check. Take a piece of masking tape and run it down the middle of the sheet perpendicular to the known straight edge. This can be inserted with the Grooved Adaptors in the holes of an MFT top to allow the square to be used on any MFT style top for complete accuracy.

TaigaTools Precsision Rail Square – Anodized aluminum, triple-locking mechanism, does not use a latch. Even if the TSO square or any of them was perfectly accurate at 90 degrees, a slight difference in pressure on the square or a slight variation in straight along the reference edge of the board is going to be magnified by 10x (? Ideally you want to use as long a rail as possible over that length as the fewer the joins the better. I've recently purchased the cordless Makita track saw and I'm really liking it (thanks to a discussion on this forum)!If you are joining two rails together to make the 8' cut make sure those rails are accurately joined together. I have found this at Atlas Machinery and to be honest I have not been able to find out who manufactures it. These 4 or 5-star reviews represent the opinions of the individuals who posted them and do not reflect the views of Etsy. You’ll receive a CMM report with every square, guaranteeing the utmost quality and accuracy for your woodworking needs. I’ve been reading these threads for a while and have bought multiple Festool products because of it.

It looks more useful in that it can be used without the mft if necessary but doesn't have the flag stops to aid with cutting multiple parts to the same length. I give up the ability to clamp the track in place, and maybe that would be the feature that justifies the purchase if I used the track saw more.The cheaper saw does the same job as the more expensive saw, it just doesn't have the refinement of the more expensive saw. After explaining my situation to Frank, he immediately sent the square to me by the next working day with a special courier. Any panels wider than the 260MM I would probably have to use the parallel guide and then use the rail square to square the ends up.

Below I have outlined most of the track/rail square options available, which I investigated prior to making a choice. Once fitted this guide rail square allows you to set your guide rail at a perfect 90°, in an instant, every time.

I definitely would not just get the fence or rails only as they serve a different purpose and limit you to using a holy top of some kind.